>To Lift Shoe Track
> Easy Lifters
For lift a shoe print
The Easy Lifters is an easy-to-use Easy Lifters that can be saved from crime scenes and does shoe print comparison prints at the location.
Easy Lifters has a thin coated adhesive surface. The Lifter can be used on non-delicate surfaces such as tile or hardwood floors, metal counters, etc.
> Example of lifting a Shoe print
Shoe print on a wooden floor at the entrance of a door at a crime scene and we found them with a flashlight with a low oblique light.
Here we can see the when we have taken one picture of the shoe print on the floor, and it is not so clear clearly visible.
To make it more visible. Place a flashlight behind the Shoe print to make it more visible.
Place the Easy Lifters film over the Shoe print.
Smooth over the Easy Lifters film lightly with a plastic scraper.
Next step, peel up one corner of the Easy Lifters and pull it off the floor as shown in the picture.
Here you can now see the result quite well already. Now it’s time for the photo table. But first, we will make a print of the shoe as we will compare it to
> To lift a footprint from the shoe
Here we have the shoe that we are going to print and to bring it for comparison with the other prints from the floor.
We have prepared with a soft surface underneath the Easy Lifters.
Take the shoe and put the heel first over the Easy Lifters and roll over the shoe to middle.
Press into the middle of the shoe continue to roll over.
Continue to roll over to the toe.
Now the Easy Lifters is stuck in the shoe.
And now just remove the Easy Lifters from the shoe as the picture shows.
Now we have the trace on the Easy Lifters. As you can see, the shoe track is visible a little, but not so clearly at once.
And now we have a flashlight with a low oblique light and the shoe trace on it appears clearly.
You can now take both prints by putting the cover paper back that you removed earlier from the Easy Lifters.
